TOILET BASE LEAKAGE REPAIR SERVICE
ABOUT SERVICE
Toilet Base Leakage Repair Service is designed to identify and repair water leakage occurring from the bottom or base of a toilet. Leakage around the toilet base may occur due to a damaged seal, loose toilet fitting, improper installation, cracked connection, or drainage-related issues.
Our trained technician inspects the toilet base and surrounding area, identifies the visible cause of leakage, carries out the required repair or sealing work, and tests the toilet to check for leakage after completion.
SERVICE COVERAGE
- Leakage from the toilet base or bottom area
- Water seepage around the toilet pot
- Damaged or deteriorated toilet base seal
- Loose toilet pot or base fitting
- Leakage around the toilet outlet connection
- Minor leakage from accessible joints and connections
- Resealing around the toilet base
- Basic leakage testing after repair
WHAT'S INCLUDED
- Inspection of the toilet base and accessible connections
- Identification of the visible source of leakage
- Removal of old or damaged sealant where required
- Resealing of the toilet base
- Tightening or adjustment of accessible fittings
- Minor correction of accessible leakage points
- Water leakage testing after the repair
- Basic cleanup of the work area
WHAT'S NOT INCLUDED
- Cost of replacement toilet, seal, gasket, or other spare parts
- Major drainage pipe replacement
- Concealed pipe leakage repair
- Toilet pot replacement
- Wall or floor breaking
- Civil, masonry, or waterproofing work
- Major floor damage repair
- Any additional work outside the booked service scope
ESTIMATED SERVICE DURATION
Approximately 30–90 minutes, depending on the leakage condition, toilet installation, accessibility, and repair required.
BEFORE SERVICE
- Keep the toilet area accessible to the technician.
- Remove personal items from around the toilet.
- Avoid using the toilet excessively if significant leakage is present.
- Inform the technician about when and where the leakage occurs.
- Keep any required replacement parts available if they are not included in the service.
AFTER SERVICE
- Allow the sealant or sealing material to set as advised by the technician.
- Avoid excessive movement or pressure on the toilet immediately after repair.
- Check the toilet base for leakage during initial use.
- Keep the surrounding floor dry and clean.
- Contact Shandar Services if leakage continues or another issue is noticed.
WHY CHOOSE SHANDAR SERVICES
- Trained and experienced technicians
- Professional doorstep service
- Proper inspection before repair
- Careful toilet base sealing and fitting
- Leakage testing after service
- Transparent service process
- Quality-focused workmanship
- Customer-friendly support
TERMS & CONDITIONS
- Service charges cover only the work specified under the booked service.
- Spare parts and replacement materials are charged separately unless specifically included.
- Final requirements may vary after physical inspection.
- Concealed leakage, major drainage problems, civil work, and waterproofing are not included in basic base leakage repair.
- Additional work will be carried out only after customer approval.
- The customer must provide safe and reasonable access to the toilet and working area.
- Service availability may vary by location and technician availability.
- Any service warranty or revisit policy will be subject to the applicable service terms.
FAQS
1. What causes leakage from the toilet base?
Common causes include a damaged seal, loose fitting, improper installation, leakage from the outlet connection, or movement of the toilet pot.
2. Can toilet base leakage be repaired without replacing the toilet?
Yes, minor leakage can often be repaired through resealing, tightening, or correcting accessible connections. Replacement may be required if the toilet or connection is damaged.
3. Does the service include a new seal or gasket?
Replacement parts are generally not included in the basic service charge and may be charged separately if required.
4. Can you repair leakage from concealed pipes?
Concealed pipe leakage is outside the scope of basic toilet base leakage repair and may require a separate inspection and repair service.
5. How long does the repair take?
Most minor toilet base leakage repairs can take around 30–90 minutes, depending on the condition and accessibility.
6. Will the toilet be tested after repair?
Yes. The technician will perform a basic water/leakage test after completing the repair.
7. What if the leakage continues after sealing?
If leakage continues, the technician may recommend further inspection to identify whether the issue is related to the drainage connection, concealed piping, floor, or another component.
