₹ 2,099.00 ₹ 2,699.00
Shandar Services provides professional Solar Mounting Structure Repair Services for residential, commercial, and small industrial solar power systems.
Our service is designed to inspect and repair damaged, loose, bent, corroded, unstable, or improperly aligned solar panel mounting structures.
Solar mounting structures support the panels and help maintain proper panel positioning and stability. Damage to mounting components may occur due to weather, corrosion, loose fasteners, roof movement, improper installation, aging, or physical impact.
Our technicians inspect the mounting structure, fasteners, rails, brackets, supports, and other accessible components before carrying out the appropriate repair according to the agreed service scope.
Our Solar Mounting Structure Repair Service may include:
System Type | Typical Repair Coverage
On-Grid Solar System | Rooftop mounting structure repair
Off-Grid Solar System | Panel mounting support inspection and repair
Hybrid Solar System | Solar panel mounting structure repair
Residential Solar | Rooftop rail, clamp, bracket and fastener repair
Commercial Solar | Multiple mounting structure inspection and repair
Ground-Mounted Solar | Support frame and connection repair where applicable
Large Solar Plant | Project-based mounting structure repair
Indicative Solar Mounting Structure Repair Charges
| Repair Type | Estimated Price |
|---|---|
| Basic Mounting Structure Inspection | ₹500 – ₹1,000 |
| Bolt/Nut Tightening & Minor Adjustment | ₹500 – ₹1,200 |
| Solar Clamp Adjustment/Replacement | ₹500 – ₹1,500 |
| Minor Rail Alignment | ₹700 – ₹1,500 |
| Mounting Bracket Repair | ₹800 – ₹2,000 |
| Fastener Replacement | ₹700 – ₹2,000 |
| Minor Structure Repair | ₹1,000 – ₹3,000 |
| Multiple Mounting Point Repair | ₹2,000 – ₹5,000+ |
| Corrosion-Affected Structure Repair | ₹2,000 – ₹6,000+ |
| Complete Residential Structure Repair | ₹5,000 – ₹15,000+ |
| Commercial Structure Repair | ₹10,000 – ₹30,000+ |
| Large Solar Structure Repair | Project-Based |
Note: Final pricing depends on structure type, damage level, number of mounting points, material requirements, roof accessibility, height, labour requirements, and actual site conditions.
The Solar Mounting Structure Repair Service may include:
The following are generally not included unless separately quoted:
If the existing structure is severely damaged, corroded, or structurally unsuitable for repair, complete or partial structure replacement may be recommended separately.
Depending on the repair requirements, technicians may use:
Step 1 – Customer Requirement Review
We understand the reported mounting structure problem and collect basic information about the solar system.
Step 2 – Site Inspection
The accessible mounting structure and surrounding components are visually inspected.
Step 3 – Damage Identification
Loose, bent, cracked, corroded, damaged, or unstable components are identified.
Step 4 – Fastener Inspection
Bolts, nuts, clamps, brackets, and other accessible fasteners are checked.
Step 5 – Rail & Alignment Check
Mounting rails and panel support points are checked for alignment and stability.
Step 6 – Roof Mounting Point Inspection
Accessible roof mounting points are inspected for visible issues.
Step 7 – Repair Assessment
The technician determines whether the issue can be repaired, adjusted, or requires component replacement.
Step 8 – Loose Component Tightening
Loose bolts, nuts, clamps, and suitable fasteners are tightened or adjusted where applicable.
Step 9 – Alignment Correction
Minor rail or mounting alignment issues are corrected where feasible.
Step 10 – Component Replacement
Damaged fasteners, clamps, brackets, or other agreed components may be replaced.
Step 11 – Corrosion Assessment
Rust or corrosion-affected components are assessed and suitable repair or replacement is recommended.
Step 12 – Stability Check
The repaired mounting structure is checked for visible stability and proper panel support.
Step 13 – Final Inspection
The completed repair is inspected before the service is closed.
| Repair Type | Estimated Time |
|---|---|
| Basic Inspection | 30–60 Minutes |
| Minor Tightening/Adjustment | 30–90 Minutes |
| Clamp/Fastener Repair | 1–2 Hours |
| Minor Rail Alignment | 1–3 Hours |
| Bracket Repair | 1–3 Hours |
| Multiple Mounting Point Repair | 2–5 Hours |
| Residential Structure Repair | 3–8 Hours |
| Commercial Structure Repair | 1–3 Days |
| Large Solar Structure Repair | Project-Based |
Actual repair time depends on damage level, number of components, accessibility, height, material availability, and system configuration.
After mounting structure repair, customers can be informed about:
Where major structural damage is identified, a separate quotation may be recommended for partial or complete replacement.
Solar mounting structure repair may be required when:
Q1. What is Solar Mounting Structure Repair Service?
Solar Mounting Structure Repair Service involves inspecting and repairing damaged, loose, bent, corroded, or misaligned components used to support solar panels.
Q2. Can you repair loose solar panel mounting structures?
Yes. Loose bolts, nuts, clamps, and other accessible mounting components can be inspected and adjusted or repaired where appropriate.
Q3. Can you repair bent mounting rails?
Minor alignment or adjustment may be possible depending on the condition. Severely bent or damaged rails may require replacement.
Q4. Can you replace damaged mounting clamps?
Yes. Damaged or unsuitable clamps can be replaced depending on the applicable structure and available components.
Q5. Can you repair rusted solar mounting structures?
Rust and corrosion can be inspected. Minor corrosion may be addressed where feasible, while severely corroded components may require replacement.
Q6. Can you repair rooftop solar mounting structures?
Yes. Residential and commercial rooftop mounting structures can be inspected and repaired according to site conditions and service scope.
Q7. Do you repair ground-mounted solar structures?
Ground-mounted structures can be serviced where applicable. Larger structural repairs may require a separate project quotation.
Q8. Do you remove solar panels before repairing the structure?
Not always. Minor repairs may be possible without panel removal. If access requires panel removal, separate removal and reinstallation work may be required.
Q9. How long does mounting structure repair take?
Minor repairs may take around 30 minutes to a few hours. Larger repairs can require a full day or multiple days depending on the scope.
Q10. Can you replace the complete solar mounting structure?
Yes. Complete or partial replacement can be considered when the existing structure is severely damaged or unsuitable for continued use.
All prices mentioned above are estimated service prices and may vary depending on structure type, damage level, number of mounting points, material requirements, site accessibility, roof height, labour requirements, equipment requirements, and actual site conditions.
Final pricing will be confirmed after inspection and before major structural repair, fabrication, replacement, or dismantling work.
Shandar Services | Professional Solar Solutions
Professional Solar Mounting Structure Repair for Residential & Commercial Solar Systems
